# Cylindrical UV Printing Explained

> What cylindrical UV printing is, how helical direct-to-object printing works, what bottles, cans and jars it decorates, and its use in the UAE and Saudi Arabia.

**Canonical HTML page:** https://www.protechnology.ae/cylindrical-uv-printing-uae-saudi-arabia
**Source:** PRO TECHnology Co. L.L.C., Dubai, United Arab Emirates

---
Digital Printing

# Cylindrical UV Printing Explained: How Direct-to-Object Bottle Printing Works in the UAE and Saudi Arabia

11 August 2026 · Digital Printing · 8 min readPRO TECHnology Newsroom, Dubai

Perfume houses in Dubai, coffee brands in Riyadh and bottled water producers across the GCC keep arriving at the same question: how do you get a full colour, full wrap design onto a curved container without a label or a shrink sleeve. Cylindrical UV printing is the answer, and the LSINC Peri Series is the industrial version of it. PRO TECHnology is LSINC's exclusive dealer for the Middle East and North Africa, appointed on 7 December 2023, and the seller and service provider for LSINC across the UAE, Saudi Arabia and the wider GCC, supplying machines, approved consumables and spare parts locally, and running the LSINC demo centre at Sun Studio in Al Quoz, Dubai, where you can watch a machine print your own bottle before you commit to anything.

## Direct to object printing, with no label and no sleeve

Cylindrical UV printing puts the artwork straight onto the product. A bottle, can, jar or cup is loaded into the machine and rotated under a UV inkjet head, and the ink is cured by UV light as it lands. There is no paper label, no shrink sleeve and no adhesive, so what leaves the printer is the finished item. It is one of four types of [cylindrical printing machine](https://www.protechnology.ae/cylindrical-printing-machine-types-how-to-choose), alongside screen, pad and rotary UV printers.

That changes the economics of a run. Plates, screens and label tooling disappear, so a single piece is possible and an artwork change is a new file and a test print rather than a new label order with its own minimum quantity. Set-up, fixtures and operator time remain, so the cost per piece still falls as the run grows. For Gulf brands running Ramadan, Eid and National Day editions alongside a core line, that flexibility is usually why the conversation starts.

It also removes a failure point. Labels lift, sleeves wrinkle over a shoulder or a waist, and adhesive shows through clear glass. A cured UV print sits on the surface itself (our [glass bottle decoration guide](https://www.protechnology.ae/glass-bottle-printing-decoration-uae) compares this with labels, sleeves and screens, and our [body spray can guide](https://www.protechnology.ae/lsinc-body-spray-can-printing-machines) covers machine capacity), and the container can be handled straight out of the machine. For the wider equipment decision, our guide to [choosing a UV printing machine in the UAE](https://www.protechnology.ae/how-to-choose-uv-printing-machine-uae) compares cylindrical machines with flatbed, direct-to-wall and conveyor printers.

## The LSINC Peri Series: three cylindrical printers

LSINC Corporation, based in Huntsville, Alabama, builds the Peri Series. Three models are offered commercially in the region by PRO TECHnology, and the choice between them is a question of volume and of what the container looks like.

- **PeriOne**, the single-spindle model LSINC positions as its entry into direct-to-object printing, for light production, prototyping and personalised work, and the one with the largest object window (up to 152 mm in diameter and 457 mm long), so it takes growlers, vases and large wine bottles
- **PeriQ360**, the four station machine for higher volumes, used for promotional drinkware production and for work as demanding as printing directly onto steel cans
- **Perivallo360m**, the contour-following model (20 to 139 mm in diameter, tapers up to ±30°), and the only one in the range that can follow a shoulder up towards the neck of a bottle

## Printing clear glass with no barrier layer

Clear glass is the hard case in cylindrical printing, because UV light travels through the bottle and can cure ink on the far wall. The PeriOne and PeriQ360 print directly onto clear glass with no barrier and no manual intervention as standard, and the Perivallo360m can be specified with a clear-media upgrade, so nothing has to be packed inside the bottle to block the light, a workaround that introduces dust and germs to a surface about to hold fragrance or drinking water. Barrier-free is about stray UV light, not about white ink: white is still printed wherever the design needs opacity.

Clear glass printed direct on the Peri Series. No label, no sleeve and no barrier packed inside the bottle. See our full guide to [LSINC cylindrical UV and bottle printing machines](https://www.protechnology.ae/lsinc-cylindrical-uv-bottle-printers-middle-east) for the model-by-model specifications.

LSINC's 2024 product sheets list a jettable primer for the PeriOne and PeriQ360, subject to the application, which on many glass jobs removes a separate pretreatment step; whether a particular glass or coating still needs cleaning, flame or plasma treatment is decided by an adhesion test on the bottle. Multi-Level Print, a recent release, lays down primer, CMYK, white, CMYK and varnish in one build, so a design on clear glass reads correctly from the outside and from the inside of the bottle. That matters when the container is transparent and the glass itself is the label.

All three machines accept a standard wine bottle: the maximum item length is 457 mm on the PeriOne and 406 mm on the PeriQ360 and Perivallo360m. Printing over the shoulder towards the neck needs the Perivallo360m's ±30° taper, since the PeriOne and PeriQ360 work within +10°/−2°. Prefilled bottles can also be printed once a sample confirms that the closure, the weight and a dry surface suit the spindle, so decoration does not have to sit before filling in the production sequence.

## What UAE and Saudi brands put through a cylindrical bottle printer

The application list is broader than most buyers expect on the first visit. These are categories LSINC lists for the Peri Series and that the group prints in Dubai. Each category, the material it usually comes in and the Peri model that normally fits are worked through in our [guide to what LSINC cylindrical printers print](https://www.protechnology.ae/lsinc-cylindrical-printing-applications-perfume-cosmetics-candles).

- Perfume bottles, including full wrap colour, marbled and snake skin effects, and raised white relief work
- Aluminium body spray and deodorant aerosol cans, printed as full wrap decorated line ups across a whole fragrance range
- Qahwa cups, printed in production quantities and boxed, including personalised two cup designs
- Glass water bottles for beverage brands, including Eid and UAE National Day seasonal designs
- PET bottles for cosmetics, haircare, body wash and food, with full ingredient and nutrition panel text printed directly on the container
- Wine and spirits bottles, printed from base to neck, including prefilled bottles
- Glass decorating: pint glasses, stemless wine glasses, whiskey glass sets and candle vessels
- Promotional products and drinkware for large promotional houses
- Industrial work: steel cans, aerosol cans and plastic tubes for paint and caulking manufacturers
- Prototyping, printing a real design straight onto a jar or a cosmetic pack instead of wrapping printed paper around the surface

A full fragrance range decorated on aluminium aerosol cans, each can a different artwork with no tooling change between them.

## Raised, tactile finishes on a perfume bottle

Raised tactile effects are a core selling point of the range, and in the Gulf luxury segment they often carry the whole design. White relief on a perfume bottle gives a decoration the customer feels before reading it, and varnish adds gloss, matte and embossed passages over flat colour.

Raised white relief and gold lettering printed straight onto the flacon, a finish the customer feels before reading it.

LSINC's own material cites Peck and Childers (2006) for the finding that a consumer who reaches out to touch a product is 62% more likely to buy it. That is third party research rather than a machine specification, but it is one reason brands ask for raised work.

White and varnish are also what make a design survive on dark or clear glass, where CMYK alone would sink into the substrate. On a clear flacon, white is the base that gives the colour something to sit on.

## Ink compliance and operator safety

Compliance questions come up early in the Gulf, particularly for anything a child or a food product might touch. The UV inks that run on the Peri Series are formulated for consumer product decoration, and the ink manufacturer holds third party test documentation covering heavy metals and regulated phthalates in the ink as supplied. That is a test of the ink, not of the cured print on your container. We can supply the applicable documents for your product and market on request.

Ask for that documentation before artwork goes to production rather than after. Which report applies depends on what you are decorating and where it will be sold, so a certificate that covers a promotional drinkware line is not automatically the right evidence for cosmetics packaging or anything food adjacent.

PET haircare bottles carrying brand artwork and the full directions, ingredient and caution panels, all printed on the container.

Bear in mind that ink test reports are generally issued against North American or European standards rather than Gulf conformity approvals. Treat them as evidence of a clean chemistry, not as clearance for your specific product. For children's items or food adjacent packaging sold in the UAE or Saudi Arabia, confirm the end use requirement with the relevant authority before you commit.

Operator safety is not optional with UV chemistry. The inks and their fumes can be combustible, may irritate eyes and skin, may be absorbed through the skin and may cause respiratory and nervous system effects, so operators wear protective eyeglasses and gloves, tie back loose hair, avoid loose clothing and remove jewellery, rings in particular.

## Site requirements, installation and support in the UAE, Saudi Arabia and the GCC

Buyers usually study the print samples and skip the site sheet, then lose weeks at installation. Site readiness is one step in [accepting a UV printing machine from trial to handover](https://www.protechnology.ae/uv-printing-machine-acceptance-checklist). LSINC's requirements document for the PeriOne and the Perivallo360m, dated 08 July 2026, sets out what the facility has to provide.

- **Delivery:** one crate, roughly 250 by 105 by 223 cm (98.25 by 41.25 by 87.625 in), crated weight about 930 kg, the uncrated printer about 481 kg
- **Footprint:** approximately 236 by 76 cm (93 by 30 in), standing 185 cm (73 in) high, with a minimum of three feet, about 900 mm, of working space left, right and rear to reach all compartments
- **Power:** 16 A, 200 to 240 VAC, 50/60 Hz, single phase, supplied with a NEMA L6-20 plug and requiring a matching L6-20 receptacle. LSINC recommends a UPS of suitable capacity where the supply is unstable
- **Compressed air:** continuously available factory air at 90 to 120 PSI, roughly 6.2 to 8.3 bar
- **Environment:** indoor use only, elevation up to 2,000 m, ambient air 18 to 30 °C, humidity 40 to 70 per cent non condensing, and not rated for vibration, shock or bump
- **Extraction:** fumes from the UV cured inks ventilated to an outside source as local ordinance requires
- **Ink:** a minimum 5 litre container of DIUR-3 on site in time for installation
- **Connectivity:** an internet connection so LSINC technicians can remote into the printer for service, using the RJ45 port on the exterior of the machine. Wi-Fi is not native to the onboard PC, so a Wi-Fi adapter is needed if you go wireless

Two of those lines catch Gulf sites out. The 18 to 30 °C ambient limit rules out an uncooled warehouse bay in Dubai or Riyadh through the summer, and the 40 to 70 per cent humidity guidance means a coastal unit needs proper climate control rather than a fan. The power supply is friendlier: 200 to 240 VAC at 50 Hz single phase is standard across the UAE and Saudi Arabia, but the machine ships with a NEMA L6-20 plug, so an L6-20 receptacle has to be fitted before delivery day.

LSINC personnel attend site to assist with uncrating and to manage proper setup in the facility, and a signed site requirements form is required before the machine is installed. Daily operator maintenance is expected after that: purging and cleaning the printheads, checking pressures, and clearing spills and broken media. Consumables such as printheads and fan filters are not replaced under the limited warranty.

Qahwa cups printed in quantity and boxed, a common Gulf gifting job.

The machines are designed specifically for inks and media authorised by LSINC, and only approved consumables purchased from LSINC Corporation or an authorised distributor are warranted for use in them. That is where a regional partner earns its place. PRO TECHnology holds consumables and spare parts in Dubai, handles installation, operator training and service across the UAE, Saudi Arabia and the wider GCC, and the required internet connection lets LSINC technicians remote into the machine alongside local support.

Machine by machine detail, including rated speeds, maximum bottle diameters and heights and a side by side comparison, sits on our [LSINC bottle printing machines](https://www.protechnology.ae/lsinc-bottle-printing-machines-middle-east) page. The wider range of industrial UV systems we supply, from flatbed to direct to wall, is on the [digital printing](https://www.protechnology.ae/digitalprinting) page. If you want proof rather than a brochure, [send your bottle, can or cup to Sun Studio in Al Quoz](https://www.protechnology.ae/book-a-demo) and we will print it, run adhesion tests and give you a realistic net output figure on your own product.

At a glance

- Authorised LSINC distributor, seller and service provider for the UAE, Saudi Arabia and the GCC
- Three commercial models: PeriOne, PeriQ360 and Perivallo360m
- PeriOne and PeriQ360 print clear glass with no barrier (Perivallo360m: upgrade); prefilled bottles after a sample test
- Raised white relief and varnish for gloss, matte and embossed finishes
- Consumables and spare parts held in Dubai, with installation, training and service across the Gulf
- Live demonstrations on your own bottles at Sun Studio, Al Quoz, Dubai

### See it running, or have the work done for you

You do not have to buy a printer to find out whether cylindrical printing suits your product. [Sun Studio](https://www.sunstudio.ae/) in Al Quoz, Dubai, part of the PRO TECHnology group and running since 2011, has the LSINC PeriQ360 and PeriOne installed on site.

That makes it two things at once. It is a working demonstration centre, so a buyer in the UAE or Saudi Arabia can watch their own bottle, can or cup printed before committing to a machine. It is also a production bureau, so brands that want cylindrical printing as a service, whether for a seasonal run, a sampling exercise or a launch, can have the work produced in Dubai without capital outlay.

## Frequently asked questions

**Can a cylindrical UV printer print directly onto clear glass without a barrier inside the bottle?**

Yes, on the PeriOne and PeriQ360 as standard, and on the Perivallo360m with its clear-media upgrade: nothing needs to be packed inside the bottle to block the UV light. Barrier-free printing is about stray UV curing ink on the far wall; it is separate from white ink, which is still printed where the design needs opacity. LSINC's 2024 sheets list a jettable primer for the PeriOne and PeriQ360, which often removes a separate pretreatment step once adhesion is confirmed on your bottle, and Multi-Level Print lays primer, CMYK, white, CMYK and varnish so the design reads correctly from both the outside and the inside of the bottle.

**Will an LSINC cylindrical printer run on UAE and Saudi mains power?**

The machine needs 16 A at 200 to 240 VAC, 50/60 Hz, single phase, which matches standard supply in the UAE and Saudi Arabia. It ships with a NEMA L6-20 plug, so an L6-20 receptacle has to be fitted at the site, and LSINC recommends a UPS of suitable capacity where the supply is unstable. You also need continuously available factory air at 90 to 120 PSI.

**How much space and what conditions do I need in a Dubai or Riyadh facility?**

The footprint is approximately 236 by 76 cm and the machine stands 185 cm high, with a minimum of three feet, about 900 mm, of working space to the left, right and rear so every compartment can be reached. It is for indoor use only, with ambient air between 18 and 30 °C and humidity of 40 to 70 per cent non condensing, so an uncooled industrial unit will not do. Ink fumes must be ventilated to an outside source as local ordinance requires.

**Can you print prefilled perfume or water bottles?**

Often, yes. Prefilled bottles can be printed on the Peri Series once a sample run confirms the closure, the weight and a dry, non-condensing surface, so decoration does not have to happen before filling. All three models accept a standard wine bottle; printing over the shoulder towards the neck needs the Perivallo360m, which follows tapers up to 30 degrees.

**Are the inks safe for consumer products?**

The UV inks used on the Peri Series are formulated for consumer product decoration, and the ink manufacturer holds third party test documentation covering heavy metals and regulated phthalates in the ink as supplied. Ask us for the documents that apply to your product and we will supply them. They test the ink, not your decorated container, and are usually issued against North American or European standards rather than Gulf conformity approvals, so confirm your specific end use requirement for the UAE or Saudi market separately.

**Who supplies, installs and services LSINC machines in the UAE and Saudi Arabia?**

PRO TECHnology is the authorised LSINC distributor, seller and service provider for the UAE, Saudi Arabia and the wider GCC, with consumables and spare parts held in Dubai. LSINC personnel attend site for uncrating and setup, a signed site requirements form is needed before installation, and the required internet connection lets LSINC technicians remote into the printer alongside local support. Only approved consumables bought from LSINC or an authorised distributor are warranted for use in the machine. Live demonstrations run at Sun Studio in Al Quoz, Dubai, on your own bottles.

Print your own bottle before you buy the machine

[Contact us](https://www.protechnology.ae/contact-us) [LSINC Peri Series machines](https://www.protechnology.ae/lsinc-bottle-printing-machines-middle-east)

← Back to the newsroom
